How to Use Extra Velcro Tabs on Your AirFort

By AirFort - The Original AirFort Site – AirFort® | Published: 2026-10-18

Category: How-to Guides

Learn how to replace or add extra Velcro tabs to your AirFort for a secure box fan connection. Step-by-step instructions included.

Quick answer

You can replace or add extra Velcro tabs to your AirFort in just a few minutes. This keeps your fort securely attached to any standard box fan, even if the original tabs wear out or get lost.

Why you might need extra Velcro tabs

The Velcro tabs that come with your AirFort are designed for repeated use, but they can lose grip over time or get misplaced during storage. Having a spare set ensures you always have a secure connection, especially if you switch fans or want a backup for travel.

Choosing the right tabs

All AirFort orders include Velcro tabs, but the Extra Velcro Tabs product gives you a dedicated spare set. They are identical in quality and size, so you can mix and match with your original tabs without any issue.

Step-by-step instructions

1. Remove the old tab: Peel the old Velcro tab away from the AirFort fabric or fan grille. If it resists, use a blunt edge like a spoon to lift a corner. Avoid pulling too hard to prevent tearing the fabric. Check if the fabric or fan surface is clean before applying the new tab.
2. Clean the attachment area: Wipe the spot where the tab will go with a dry cloth to remove dust or lint. For the fan grille, a damp cloth can help remove sticky residue, but let it dry completely. A clean surface ensures the adhesive bonds firmly.
3. Align and press the new tab: Peel the backing from the new Extra Velcro Tab and press it firmly onto the clean surface. Hold it in place for 10 seconds. Make sure the hook side faces the fan and the loop side faces the AirFort. Common mistake: pressing too lightly or not holding long enough can cause the tab to peel off later.
4. Attach the AirFort: Line up the AirFort's loop side with the tab's hook side and press together. Give it a gentle tug to confirm the connection is secure before turning on the fan. If the connection feels loose, double-check that both sides are clean and properly aligned.
5. Test and adjust: Turn on the fan at a low speed first. Watch for any slipping or lifting. If the fort shifts, reposition the tabs or add an extra one for more stability. Running the fan on high immediately may dislodge a poorly attached tab.

Product facts

Extra Velcro Tabs: All AirFort orders include Velcro Tabs so you can easily attach your AirFort to a standard box fan. If you would like to have some extra tabs for another fan or just in case you lose the ones included with your AirFort, just add this item to cart. Having extra tabs means you never have to worry about a missing or worn-out tab preventing you from setting up your fort.
Extra Velcro Tabs